CustomWorks

DemoCompany

https://customworks.app hello@customworks.app

Projects Canamer 33 ONE — Technical Refit

Client: ONE boat owner — demo project

Client feed
Before After
Show more Collapse

A demo refit case study of compact motor cruiser Canamer 33 ONE, based on material from Italian yard Nautica Servizi Terra d’Otranto. A small private boat rather than a large expedition yacht.

The focus is on onboard systems: new electrics, a Mastervolt 3.5 generator, air conditioning, a bow thruster and Raymarine navigation equipment. The yard also lists Volvo Penta D6 engine installation and a full hull repaint.

Project galleries show the cockpit before and after; the feed covers technical stages and a sample approval request. Post order is reconstructed for this demo; the refit budget is not published.

Photographs and source: Nautica Servizi Terra d’Otranto. https://www.nauticaserviziterradotranto.it/en/refitting-totale-imbarcazioni/one/

A demo refit case study of compact motor cruiser Canamer 33 ONE, based on material from Italian yard Nautica Servizi Terra d’Otranto. A small private boat rather than a large expedition yacht. The focus is on onboard systems: new electrics, a Mastervolt 3.5 generator, air conditioning, a bow thruster and Raymarine navigation equipment. The yard also lists Volvo Penta D6 engine installation and a full hull repaint. Pr...

Project before & after

Before

After

Cockpit strip-out and deck preparation

The cockpit before renewal: removed timber pieces, old decking and exposed surfaces. The following photographs show the stripped seating area and new decking being fitted around the hatches.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

Electrical installation, generator and air conditioning

The technical spaces contain a Mastervolt Whisper 3.5 generator, electrical units with their cabling and a separate air-conditioning unit. Close-ups show the equipment layout, hoses and acoustic insulation.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

Bow thruster: outside and inside

Two views of the same installation: the tunnel in the underwater hull and the thruster drive inside its compartment. The exterior photograph shows the prepared hull surface around the tunnel.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

Helm station and Raymarine navigation

A close-up of the updated instrument panel with Raymarine displays and monitoring gauges, followed by a wider view of the helm. The photographs show the equipment layout and access to the controls.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

Cockpit before and after the refit

Compare the cockpit before strip-out and after renewal. Additional photographs show an intermediate decking installation stage and the finished surface with its fitted hatches.

Photographs: Nautica Servizi Terra d’Otranto.

Before After

Before

After

👍 0

Approval request: pre-launch checks

Pending

Sample approval request. Please approve the check programme covering power supply and protective devices, generator and air-conditioning operation, the bow thruster, instrument readings and engine-system connections.

Approval moves this demo scenario to pre-launch checks. If changes are needed, include your comments when rejecting the request.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

ONE back on the water

The final image from the yard’s gallery shows compact Canamer 33 ONE under way after the refit. It completes the demo overview, moving from technical compartments and work ashore to the finished boat afloat.

Photographs: Nautica Servizi Terra d’Otranto.

👍 0

Created: 22.10.2026 19:41 Updated: 22.10.2026 19:40